Rolon Chain And Sprocket Kit For Ktm 390 Adventure - Kit Hxr 337
Rolon Chain And Sprocket Kit For Ktm 390 Adventure - Kit Hxr 337 - Image 2
Rolon Chain And Sprocket Kit For Ktm 390 Adventure - Kit Hxr 337 - Image 3
Rolon Chain And Sprocket Kit For Ktm 390 Adventure - Kit Hxr 337 - Image 4

Rolon Chain And Sprocket Kit For Ktm 390 Adventure – Kit Hxr 337

₹2,645.00

  • Built for High power Motorcycles
  • Long lasting performance
  • Specially designed for Higher strength
  • Compatible with all terrains
Category: Brand:

Description

Front Sprocket

S 02 560 – 15 Teeth

Mounting:- 2 Tap on PCD + Involute Spline with Bonding

Rear Sprocket

S 02 499 – 45 Teeth

Mounting:- 6 equispaced Holes on PCD + Bore

Chain

R520HXR-112-2

Front Sprocket

  • Reliable with high performance & longer life.
  • Smooth operation & higher transmission accuracy.
  • Anti-resistant coating with Superior quality.
  • Anti-wear performance which lets vehicle move with full power.
  • Produced with Hi-Tech accurate machining which reduces noise and provides smoother riding.
  • The fitment of the product is as per OE specification.
  • Heat treated and hand finished to perfection.
  • Every sprocket goes through 18 production stages and 15 individual quality control checks before it is ready to leave the manufacturing facility.

 

Rear Sprocket

  • Sprockets are manufactured from carbon steel material with duly induction hardened teeth.
  • Sprockets are only made using the best available materials.
  • Zinc coating to provide better rust prevention.
  • Induction hardening to improve wear resistance with outstanding performance.
  • Shot blasted sprockets with improved surface fatigue strength.
  • Sprockets are made of best surface protection treatment which enables to withstand dust and muddy ride with ease.
  • Sprockets are of made with best position accuracy to ensure better fitment capabilities.
  • Good surface finish that makes ride smoother.

Pack Contain

Pack Contents one Rear Sprocket,Front Sprocket,Chain

 

Chain Maintenance

  • Lubricate the Chain using ROLON Chain Lube for every 500km in Seal ring chains and every 1000km for Standard Chains.
  • Clean the Chain using ROLON Chain Clean Spray. Every 2500 -3000 km’s once chain should be cleaned and then re lubricated.
  • Use nylon brush or soft cloth before lubricating the Chain.
  • Avoid usage of Steel wire brushes to Clean Chain.
  • Don’t use petrol,thinner and hot water for cleaning,and high pressure water jet direct contact to seal ring chain should be avoided.
  • Make sure your chain should be in adequate chain slackness – 1 inch min.
  • Dampers should be changed while chain sprocket replacement for better life of Chain Kit.
  • Wear Helmet for Safety – Follow Traffic Rules.

 

Description

Front Sprocket

S 02 560 – 15 Teeth

Mounting:- 2 Tap on PCD + Involute Spline with Bonding

Rear Sprocket

S 02 499 – 45 Teeth

Mounting:- 6 equispaced Holes on PCD + Bore

Chain

R520HXR-112-2

Front Sprocket

  • Reliable with high performance & longer life.
  • Smooth operation & higher transmission accuracy.
  • Anti-resistant coating with Superior quality.
  • Anti-wear performance which lets vehicle move with full power.
  • Produced with Hi-Tech accurate machining which reduces noise and provides smoother riding.
  • The fitment of the product is as per OE specification.
  • Heat treated and hand finished to perfection.
  • Every sprocket goes through 18 production stages and 15 individual quality control checks before it is ready to leave the manufacturing facility.

 

Rear Sprocket

  • Sprockets are manufactured from carbon steel material with duly induction hardened teeth.
  • Sprockets are only made using the best available materials.
  • Zinc coating to provide better rust prevention.
  • Induction hardening to improve wear resistance with outstanding performance.
  • Shot blasted sprockets with improved surface fatigue strength.
  • Sprockets are made of best surface protection treatment which enables to withstand dust and muddy ride with ease.
  • Sprockets are of made with best position accuracy to ensure better fitment capabilities.
  • Good surface finish that makes ride smoother.

Pack Contain

Pack Contents one Rear Sprocket,Front Sprocket,Chain

 

Chain Maintenance

  • Lubricate the Chain using ROLON Chain Lube for every 500km in Seal ring chains and every 1000km for Standard Chains.
  • Clean the Chain using ROLON Chain Clean Spray. Every 2500 -3000 km’s once chain should be cleaned and then re lubricated.
  • Use nylon brush or soft cloth before lubricating the Chain.
  • Avoid usage of Steel wire brushes to Clean Chain.
  • Don’t use petrol,thinner and hot water for cleaning,and high pressure water jet direct contact to seal ring chain should be avoided.
  • Make sure your chain should be in adequate chain slackness – 1 inch min.
  • Dampers should be changed while chain sprocket replacement for better life of Chain Kit.
  • Wear Helmet for Safety – Follow Traffic Rules.

 

Related Products