Description
Details of the ORAZO IBIS BOOTS:
SNAPSHOT:
- 12 inches tall
- Velcro Fastened
- Light reflector at heel side
- Ankle protection
- Shock absorption near the seat region (ie. heel side)
- Steel toe protection
- Highest grade abrasion & water resistant leather
- Smooth leather finish including tongue area
- Well designed flex points makes walking comfortable
- High degree anti slip dual density sole
- Ultra – comfy bounce back foam in-socks (anti-fungal)
- Shin protection
- CE certified to EN ISO 20345 : 2011 standards
EXTERIOR
- 12 inches tall
- Combat boot styling
- Velcro fastened
- Smooth leather finish
- Leather tongue
- Light weight PU Sole
- Highest grade abrasion resistant leather (removes necessity for a toe slider)
COMFORT
- Riding boot upper made of water-resistant and breathable leather and fabrics.
- Anti-fungal latex In-socks – to keep feet cool & dry on long rides.
- Well designed flex point makes it comfortable to walk & provides support to feet at odd positions.
SAFETY
- Reflector material attached on the rear side to enhance visibility in dim/dark areas.
- EVA plate on the shin to protect from impact against loose, flying objects.
- Thick leather coated around the ankle for impact and torsion resistance.
- Steel toe protection against injuries caused by heavy/hard object impact or vehicle run-over.
- Anti-slip dual density slow which minimizes chances of injuries in slippery areas.
- Shock absorption on the seat region (ie. heel side)
CERTIFICATION
- CE certified which conforms to EN ISO 20345
IDEAL USAGE
- Touring
SUMMARY
- This is the motorycling rider boot you need if you are on the road for several hours at a stretch. With your trouser ends tucked into the boot-neck you will be safe from hazards like flying grit, hot sand or pebbles. With the standard water resistant version, water from mountain streams or puddles will simply run off the exterior of the rider boot without wetting your feet inside. This is a 12” high rider boot fitted with a light reflector shin and ankle guard at the heel side for added safety.
SIZING GUIDE for ORAZO IBIS BOOTS:
Abide by the following instructions to the point and you will get your foot size:
APPARATUS REQUIRED: A4 size blank paper, Pen, Measuring Ruler (Scale)
1.Identify the ‘estimated size‘ of your foot by using your current shoe size (eg. Size 8 or Size 9 etc.) |For this explanation we will use size 9 as an example|
2.Get the corresponding length (in cm) of the following sizes from the size chart give below. – ‘estimated size’, 2 sizes above your ‘estimated size’ & 2 sizes below your (Total 5 sizes) – |For our example we will get the length of
1. Size 9 = 27.1 cm (estimated size)
2. Size 10 = 27.9 cm (estimated size + 1)
3. size 11 = 28.8 cm (estimated size + 2)
4. size 8 = 26.2 cm (estimated size – 1)
5. size 7 = 25.4cm (estimated size – 2) |
3. Take an A4 size sheet and mark the length, from the bottom of the sheet, of all the 5 sizes. |as shown below|
4. Place the bottom of the sheet on the edge of a wall & place your foot next to the sheet such that the heel is touching the edge of the wall. |As shown below|
5. Match your foot-length with the corresponding size mentioned in the A4 sheet to get your correct size. |As seen in the picture above, the foot length falls between size 8 & size 9. Therefore, the correct foot is size 9 |
[Disclaimer: Standard footwear size measurement is on the basis of length as per the procedure described above. However, in case of variation in girth of the wearer’s foot, the fitting could change]
